Separate names with a comma.
I am installing my 8973 box, I do not have a crank trigger on my 44 amp mag. How fare away from the Mag can I mount the 8973? and is there a cable...
blower pully set up When I first got started this same issue kicked my butt and I finaly went to RCD's web site and down loaded there 8mm pully...
All, what I need it the diamension from the center line of the axle to the face of the drive coupler, for a 9 1/2 top loader ? thanks again for...
Yes , 2200 #'s both of us need to go on a deit :D
glide temp, blown alky set up Just my 2 cents, But we never see much heat in the pan, most of the heat we see is in the converter. At the end of...
All, I have a question, I am running a 206D on a BBC, we are only running it at 50% to 60% over drive depending on C.A. , My question is what...
No more oil in the puke tank All, I just wanted to say thanks for all of the great info, we ran are first race of the year last weekend and we...
Sac funny car fever race Mike, come on over to the pits when you get some time this weekend !!! on the nitro , it took me the rest of last year...
TEW Race Ron, Team Stroupe will be there and ready to make some noise, see you Friday morning in line at the gates, It has been to long of a...
oil in the puke tank All, thanks a ton for the great info, we have installed the breathers in the very top of the valve cover, over the large...
Valve adjustment Ron, We do it about the same as above and it works out real well, cold .010 and .012, after a run and hot .022, are you going to...
Does anyone know were I can buy a valve that will open with CO-2 that I can run Akly through for a hi speed? The only one I can find will flow the...
oil in the puke tank All, thanks for all of the great idea's i really appreciate it, the blocks we are using are the new century 10,200 soild, i...
oil in the puke tank Jody, We are running the dart 360's heads, have you heard of any issues with them? Thanks for reply
Hay all, I could really us some help, I run a BBc/206d/44 mag, set up we are making about 2300 hp in a rear engine dragster and for the last few...
shogun Mike, You should call Shogun, Talk to Bill. I would think that if you did not energize the coil on the trans brakes, you have something...
206d I have a 206D that had a 5/16 bolt that when through it, case and rotors are screwed, I would sell it to you cheep, and I will pay the UPS...
Data logger, problems Danny, I had this same thing happen to me on my blown alky BBC, We are running a 44 amp mag, I have all of the mag...
Best Bbc Block Call lowell at New Centrey, 618 466 6383, I have run his blocks for years and have never had a issue we made about 2600 hp , Just...
fuel adjustments Gene, sorry about that!! we made all of the adjustments in the hat, The only point I was trying to make was to keep the fuel...
