Separate names with a comma.
Thanks Will. So let me ask a loaded question if I may, and if anyone wants to reply offline that is fine....... Has anyone tested the Bohr PM/FC...
What about these fabricated (bonded) carbon fiber bars. Are they turning out to be reliable?
Thanks Andy, that was very helpful. What sort of overdrive were you testing at? 1.92? 2.28?
Would it be allowable to run a dedicated hard aluminum vent pipe through the interior, along one of the rails at floor level, to the rear where...
A lot of applications plumb their engine breather purge lines to the frame rails, and then to the puke tank. Does the condensation corrode the...
Dumb question for the day...... When I look at recent videos I notice something interesting. Some teams still run the old school open bottom...
Okay, maybe this is a dumb question. What are most people doing for balancing their newly mounted bead-lock rear slicks? Bubble Balance?...
My read is that the structure must me immovable and stationary during a run, but that's only me. Imagine what could happen if NHRA let off a bit?...
Get ahold of Jeff Bohr here http://www.bohrproducts.com/ He will steer you right........
Now there is a true statement indeed about the 3199's. Have a set of brand new 3199's I can part with, if you are interested. Have been bagged...
LOL, "Trial & Terror". Most are setup to accommodate normal engines.......
This brings up an interesting question. Cam companies are great for giving suggestions. Quite often their suggestions are based upon empirical...
I like this one too......... [MEDIA]
With the splined stuff, are people still using anti-seize, and if so any particular recommendations as to type?
What is a typical driveshaft length, joint to joint center, for say a 115" wheelbase PM these days. Doing some measuring and thinking about...
one other thing to consider. Take the old crank, and the new crank, and carefully measure the diameters of the snouts. Is there a variance...
Bearing support in front of, or behind, crank pulley?.....
I'd like to go down and watch/help you. Lacking sunshine up here......
Thx Rob. Did the insert plates really make any extra power/performance, at either 92 or 128? I'm curious about that......
?????........... What do you mean by this?
