Separate names with a comma.
just got back from pomona and i have to wonder what happened to the cackle of the nitro cars?:confused:they seem to sound smooth and tame compared...
what kind of fuel system change would you guys recommend when adding 10% over on the blower.not looking for record et's just to run better and be...
i was told to put the high speed in the port line.reason being you don't want to take away fuel going through the blower as that is what lubes and...
so cal dealer hey mike,, there is a dealer for brad penn right near me in hawthorne.its a vw machine and parts shop i use....
work it in same thing here.when i got the XL out the box there was no way it was going on and i laughed in disbelief.after about 10 mins of...
the quickest easiest way is probably the way i was shown.turn the motor by hand and every time a valve comes up stop and check it it.no firing...
thanks for all the help,,i had time to look at the gauge this weekend and found a problem.pre stage i have 100psi but through the traps i have 0...
i'm running a faria pump,it came with the complete engine i got and the guy before had been running it for 5 years as is.he even said not to...
thanks for all the ideas.i've been too busy:eek:learning to drive to have time to look at the pressure through the traps.it a steady 80 lbs pre...
yeah he told me the same thing.i did'nt like the resistance and breakdown of the msd's anyway.far happier with the mallory solids but i don't have...
hi guys, just pulled the bearings after 5 low 7 sec runs.not hammered or squished but they have shiney edges as seen in pic.does'nt look good to...
is it a good idea to run any kind of toplube in the alcohol?seen it advertised but never heard about it being used.....thanks.....
i was going to run without one too but was told that its no so much for the cooling but as a chamber to allow the fluid to settle down before it...
$$$$$$$$$ dropped it off at Mike's today and we went over all the options and for now i will have to go with the mike's super duty ringless stock...
b&j thanks,that could be worth 200,000 cents to me.that's what i've been thinking about,what is the next level trans to go to.what is involved...
thanks for all the replies.i AM using a Mike's transmission as i heard good things about him before deciding who to use.i called him today and he...
on the 8th run of my new FC car i hit the mildest tyre shake 100ft out and the input shaft on the trans snapped.i know from reading old posts that...
is there anything wrong with just putting in a dead spark plug to fill the hole??
splines i'm going to say a definate NO.i have 35 spline MW floater axles and they did not go anywhere near a 35 spline strange spool.i called MW...
plugs yeah i'm using the B9ES's with good results.why are the 6061's popular now?availability or a performance gain?should i have removed the...
