Separate names with a comma.
I have one from a Uyehara car. Joe 559-287-0952
I have one in a top fuel sand dragster and have never had a problem. Joe
Something else to remember make sure your air supply will maintain at least 110# of air pressure and not go below. I have seen some one use a...
Depends on which heads you have. The spacing between the ports is different on some of the models. Contact Robert Reehl he knows the port...
Try your local machine shop and have them put it in their jet cleaner.
Thank you, Joe
I need Bob's # Thanks Joe
Who built your trailer?
I had the Butler built pads in my car when I crashed. I talked to Jeff Garvin after the wreck and thanked him for making such a quality product!!...
Randy, yes I know Shane he is a hitter in the sanddrags! He told me you help him with his tune-up. Unfortunately he hurt some parts at the last...
Randy, I had a driver that had a hard time holding a steady RPM at the starting line, no tach. So everyday I had him suit up and get in the car,...
Ce Be Products 562-634-0442 ask for Dave
End Gaskets Alan Johnson sells it by the roll so you can cut to what ever length you need. AJ # is 805-922-1202
Congradulations Daryl from your old crew in California Dave, Bev, Gina and Joe
Tony check your PM. Joe
I run a TFX billet block, raised cam, 2.000 spread lifter, Dart head "99", AJ black stands with dog leg, Stage 5 int & ex rockers and they clear....
Spread Lifter. Stock hemi is 1.800" spread is 2.000"
Does anybody have Bill's # or have him call me. Thanks Joe 559-287-0952
I have a TFX billet block with all 5 mains saddled and have zero main bearing problems. By the way blown fuel 92%
I have worked on a fuel funny car and sometimes the clutch welds together and is compression braking in the shut down. We have not had any...
