Separate names with a comma.
Some people close off the lifter valley in an effort to make more power at the crank, since the rotating assembly isn't beating through the oil....
Wouldn't the dry sump make more power?
All tractor pullers use 2, beit Mallory or MSD mags.
What diameter is the crank journal? is it 2.750?
I too have heard that Sassy pistons are touching on purpose but thats been many years since I heard that. I build our stuff to barely kiss off the...
Even the Autometer limiter that shuts the engine off? vs the one that shuts it of/turns it on/shuts it off/turns it on...
I don't use a thermostat at all and have left them on for hours without any ill effects that I've noticed, maybe mine have internal thermostats
After burning up multiple stick on heaters we went to weld in and all 3 of them are still working just fine. Maybe I was doing something wrong,...
So in your experience the aluminum imbetween the cylinders lasts longer?
I spoke to Dart and yes its the cap that is bending.
When the caps get loose in there registers, what is deforming, are the caps actually bending down in the center and therefore pulling the sides in?
Seems like main cap girdles were once popular with BBC guys, anyone out there using them, making them or are some still laying around? Would...
hard to drive 44 mags driveline? When you Chevy guys are putting these hard to turn 44 mags on, do you still drive them with the normal Ø.500"...
We've done 6.660" on alot of our stuff with that stroke and deck height. Have also used that same exact rod on 4.5" stroke, just had shorter...
Do some engines use a keyed connection between the bronze gear and the shaft?
My guess is the valvecover to oil pan hose isn't large enough, it needs to be able to equalize that psi difference very quickly. It works for me,...
I've had this exact thing happen more than once. I've also had bent rod bolts that came out of my biggest stroke engine, it had a lot of runs...
I sent you a PM and email.
On Chevys some guys bronze bush the block from brand new or wait till they're wore out then bush them back to size. What tells you that there...
Is the bottom of your blower wide open from front to back?
