Separate names with a comma.
Nozzle Area? Seems to me that if the nozzle area of the hat nozzles let the engine pull well, then wouldn't adding port nozzles make the A/F...
No Refund on Used Parts I would say that as long as the seller accurately described the item AND does not represent the item to be free of...
References on a Seller As is my standard practice, before I send ANYBODY money for parts, I check them out, just like you are asking about. I...
Delta Outlet Ok, 107 views and only one reply. Good advise, too, BUT if you just don't want to buy a different manifold, you could probably...
20w50 I'd pass. I use 60W and would not consider anything 20W.
Mike Canter Spending Too Much Time On ITA Hey Mike, Don't stop posting now. I still have a lot to learn!!!
Starting Issues Be sure the "MAG COMP" in the 8973 is set to "AUTO".
Copper Fuel Line I take it that you are talking about hard copper (rigid) and soldered fittings at the bends. I certainly would not use soft...
Trans Brake Buttons The Dedenbear button is too easy to push for what you are looking for, I have one, I know. If you are deadset on an...
Cousin Bubba / Internet Confusion My 526 Brad hemi with a 14 HH will idle smooth at 1,450 RPM, no surges. I actually idle it about 1,800...
Extension Cable Ditto what Mike said. No problems here either.
11" Blower Snout I ended up finding a machine shop that regularly makes snouts and had them make me an 11", said to have double bearings on...
Top Secret Information Personally, if you have the finances and the dyno close enough to go to, I would suggest the dyno tuning. The main...
Pedal or No Pedal for Crowerglide Maybe I read it wrong or something and I am not a glide clutch type of guy (I run a 3 disk Crower Pedal Clutch)...
Crankshafts I bought a Bryant recently but I had also priced a Crower forged. Bryant had an 8 to 10 week backlog at that time while Crower...
Header Gaskets Not sure what type of heads or flanges you have but I have good results using Felpro #1418 which is a fiber over metal core gasket...
Blower Snout You have an email.
Blower Snout Issues Hi Dave, I kind of expected I would need to have a snout support of some kind. I am still worried that the rev limiter...
Looking for some advise. I have made a plate to set my blower, a LF 14 HH back to where it places the pie outlet closer to the center of the...
Mr. Canter you have a PM.
