Separate names with a comma.
You may find that the valve to piston difference has altered on the opposing bank. If left as set on # 1 you would find opposing bank will be...
Chamber design: half round or fig 8 chamber. I see some hemi heads are coming out with the figure 8 design for the chamber, is there any...
I note there are a lot of s/h bruno units for sale, why is this. A lot have lencos attached too ??? Are they not up to it for a blown alky...
Thanks Bob Thanks for the chat today Bob excellent, if you get a chance to stop over in Auckland for a day or so let me know Grant
What about if fitted taller tyres on rear ? Bob will your answer be same for: fitting taller tyres on the rear, from original build ????
I use very hot (boiling) water and clothes washing powder, put in a bucket and agitated with a stick, cleans up chutes like new too.....
You can convert it your self if you so wish. Unscrew the 3 studs installed in your unit, make an accurate 4 hole pattern OR buy a E-3000C FUEL...
Without knowing what your (USA) rule book says, I would recommend you install a piece of ali, minimum of 1/8" 6061-T6 1 x between frame and tank,...
Make a snout support, clamped to the snout same way a conrod is bolted together, 3/8 thick ali will work fine. Bolted to the front of your motor...
Give your front wheels a slight amount of toe-out, this should cure your problem.
Dont know whether it would hurt too much, we are pretty used to fitting up ali heads, manifolds, water pumps, timing covers etc on cast iron...
Normal cement and foundation sand, mixed to a strong brew. If you really want to, you could warm up your block and pour aluminium in, used this...
A mesh screen under the hat & between the intake manifold and head (Fly screen mesh) seems to work well. Years back I bought some kinsler shot...
kiwi Grant Briff
Howards. See you @ WSID next week ?
I did look into this a while back, the local cryo shop advised, no real gains on aluminium. I still wonder........but took his advice.
Yes, is there an advantage of one over the other.
Why is it some billet cranks are fully counterweighted and some aren't. Blown alky application.
Ditto, but now carry a spare. burns out when on too long. went to local wreckers yard, some japanese cars use same motor and unit, you may find...
Convertor car too ??? With a convertor car, is this a matter of just plugging it into the rev limiter & setting up a transbrake button, or are...
