Separate names with a comma.
I agree, Greg you being crew cheif and owner should have shut car down, (or directed your bro to stage and take the win, if this was an offered...
tyre life I talked to a buddy of mine, who is in the tyre business, about the life of tyres, he advises: they are good for approx 7 years as the...
lifter spead I too have had trouble with this happening- using 7/8' lifters, not a bbc, lunati where first on 305 seat pressure so bought crowers...
Thanks Mike & Tim. They came nicely polished, no details visible on them any where.
hi what is the back lash for a 9" 3.89 gear set. for blown red. not pro-gears. ex nascar. bought these off ebay
i have mounted mine beside trans with 2 aircraft style hose clips, the type you use a socket on (gave them a wee tweek to get just right) undo...
You could also fit an electric (moroso) solenoid with a switch in your cockpit. The accumulator is easy to service too as an o'ring kit is like...
hemi style but with fig 8 combustion chamber
I'm in the process of constructing a manifold for my engine with 2" runners. Am concerned that a vee on the bottom is too directional. (unable to...
With the 111 do a plastercine (modelling clay) check on no. 1 and on the 1st cylinder of the split of your firing order. compare to see if they...
What I have seen that lets down a powerglide equipped car is too big a rear tyre, I switched down to a 33" and moved the rear end ratio up to...
hi hope you get lots of replies, cheers
Hey thjts I see you work for air firm, do you have access to the machine shop ?
Would 3 bolts each side, between the ports, be adequate to hold a blower manifold on to the heads.
What is the minimum ring land to valve pocket clearance when milling a piston.
If your going to re-teflon it yourself, after pulling the teflon in, leave the rotors in a nice warm sunny spot for 1/2 an hour or so before...
After 30 years of running drag cars, altereds & dragsters, Ive never used an exhaust gasket, never harmed a head from this either.
May 2007 while in Australia, I watched a top fuel car go 4.70 with an Enderle Buzzard. (The guy runs on an extremely limited budget)
What is a good and reasonably safe compression ratio for a blown alky 4.1 stoke x 4.440 bore dragster motor with 16/71 H-H @ 36% and hemi heads....
Try Ken Lowe in Australia. <ken@kenlowe.com.au> www.kenlowe.com.au
