Separate names with a comma.
on my promod car ive bleed 3 different ways and the pedal is good untill a few hrs later and i have to pump 2-3 times to get the height back im...
my old car had spring launchers my new car has air launchers what kind of a electric switch would you use im scared i will bump it accidently...
8973 i have the lahee timing box and it looks steady on my racepak is the 8973 still being sold or is it obsoleted by the 7730 grid duane
video camera still looking for video camera that will integrat with racpak let me know the good ones and link me to examples thanks
psi hat i think mine is a gore lip i think they advertise here duane
how many 4 link programs are their whate are they called and where do i get them thanks
end bolts i have them on my brad 5 heads just drill 3/8 up through bottom take a 3/8 black grade 9 allen bolt and turn the od of the head to...
my cam my cam i-290/500 e-296/510 118 cl in at 33deg my cyl1 go dead even with no hose on port reving past popet(4500) does the cam...
camtiming i have a lencodrive psi c brad 5 cam in at 33 deg and 10.4 comp 4.150x4.467 it likes to flood cyl 1 and 2 out when in gear and when...
starter solenoids we have a mag 44 also 2 different engins and mags still same problem and we dont crank it for oil pressure thanks
does any one have a better solenoid than what comes on the tilton starter screw blown brad 5 solenoids stick and sometimes only click i run...
brad 5 cyl heads c screw blower 115 od 47 psi boost @9000 what spring pressures should i be running intake exhaust ive been using 050 erson...
thanks thats what i needed does your combo have about 10.9:1 compression no the crank was for my spare motor thanks again
i just changed my crankshaft from 4.375 to 4.250 x4.375 bore i poored my chambers and get 121 cc with 7.276 rod and .070 gasket i figured it is...
i always liked brooks rods and now that mine have been ordered for 2 months and cant get ahold of them its time to move on (so jerry at brooks...
8973 ok i got my answer from msd it must be ran for any rev limiting 2 step burnout thanks
msd 8973 do i have to run the two yellow wires to the points box or can i just leave the rpm chip in it i never change it on myother car so if...
i put new strange rotors on my pro mod and flushed all brake fluid and installed napa dot 5 brake fluid now the pedal falls to the floor on...
