Separate names with a comma.
who is every body using im not having any luck with who im using 3 cams reground and all 3 are way off they were ground to the same card ones...
lean make sure the barrel valve isnt closing when almost wide open on mine if you put the link in the outer hole it will go closed at wide...
what kind of fuel pressure is safe when you close the throttle im seeing 380 with a 210psi #6 pump saver it also goes to 220 @10000rpm in high...
prism let us know who will be doing this i need a few cases thanks for your past efforts duane
ok my old tires were 108 and 108 1/8 the new housiers are 107 and 108 i measured 3 times i had 6 lbs in them then i aired the new ones to 12...
questions on screw hats 1-jbr front loading carbon hat 2-psi funny car hat with air foil kit and gorr lip 3-bohr carbon ?? hat that extends the...
24v mine starts with 2 16v= 32v promod psi c hemi 115od starting at blower compared to you at crank may be slower mostly with 24v id tie 3 12...
psi good luck with them
can a 296/477 cam be reground into a 296/500 i have 2 of these and need 296/500 thanks
were do i buy brad 5,6,8 lightened exhaust flanges thanks
8973 thanks mike the lahee is for recording timing into racepak and i set crank trigger first to 24 then i set mag(phasing) to 22 both with a...
we ran some 3.80s outlaw promod and our mph is down the timing starts and is set at 24 degrees after it ramps out and back in it only goes back...
fuel managementl make sure you use a wot switch with the trans brake switch so its only activated wot when the tb is released ill have to look...
.477/.500 cam and 1.7/1.52 rockers i have 2 brad 5 engines intake/exhaust lobe/ screw c promod 9600 rpm automatic 52lbs boost 2500 lbs one is...
60/40 Comp Eliminator Join Date:Mar 2008 Location:Kansas - west of Wichita Posts:73Sodak is correct, more fuel in the hat helps the blower....
1 and 2 nozzles dont lean 1 and 2 nozzles they will be lean at the 1/8 mine was thats why i didnt lean 1 and 2 take the hose off 1 or 2 and...
ngk spark plug date code i need to know when a set of plugs were made to settle a dispute the code is M061 can someone help me out on the...
973 so mike if i have a 8973 with crank trigger it should be set on auto mine is set on 2 degree now and the timing is set if i change to auto...
8973 mine was set on auto for 5 years and worked fine now its set on 2 degree and runs good also i really dont know what it does i record...
2lbs do i need the 2 lbs check valves in the front and rear the brakes wont drag will they thanks
