Separate names with a comma.
Does anyone have a number or e-mail for the Fanning's (udder nonsense fame) ?
Had a 4.565 bore Merlin block. Ran the ICS gaskets and they were fine up to 16lbs. of boost (6-8 passes). When we went to 28lbs they made it two...
Can't beat the Sitko drive, its solid, sticks the mag out front and out of the way, less $'s than RCD and George will custom make the extension...
6.50 index?
Didn't get a chance to ask him today when I stopped by, they are slammed with business. He probably would've said "whatever Robert sales" ;)...
TFX with AJPE stage IV fuel heads. Low compression on alky with 36lbs boost, 44 mag. What plug would do you suggest and at what gap? Thanks
So it looks like four things to take care of; Ensure adequate piston to head clearance Run some good racing oil Add an Accusump Add a...
I have a DL-32 and I'm not happy with it. We could never get it to record everytime; it was hit & miss. The sampling rate is low also. We are...
If it was oil starvation, wouldn't it take out the rear con rod brgs first? I would think rear main would be first to show signs of abuse....
If you think it might be a loss of pressure in the shut off pick up an accusump. I ran one with my BBC and had it set to push oil back into the...
How did you pick up 1 point of compression? Any chance the pistons are hitting/kissing the heads?
I have a 19 gallon pump and only need about 15 gallons right now (we'll need it all later). I'm plumbing in a checkvalve/hispeed between the shut...
Congratulations!
1500-1600hp enough to run 6.50's in a light car.
You will not be able to cruise that car without it being dangerous and or building too much heat in the trans and washing down the cylinders. Just...
Thanks VW, I ended up buying from Vortex Induction Sports in OR. #800-615-8823. I got a 2.25 - 1.75 reducer coupler and a 1.75- 1.25 for $9.49 each.
Correction; the correct e-mail address is, Whitney.gm@gmail.com
I found the marine 1.25 hose on e bay for $5 a foot. I'll check out the lead above. I've heard of radiator hose before but wasn't sure If my leg...
Looked at Will's link didn't see what I need. Going from 2 1/2 inch OD coming off the tank and going to a 1 1/4 OD slip on style fitting on the...
He is 4 ft. tall :eek:
