Separate names with a comma.
Maybe think about the heat left in the converter if you just kill it? Idling round to the return road , helps keep the converter and trams temp a...
Did it on a Chevy motor we had , sorry no pics. But worked great. Wayne
Pretty much what we do , it makes all the difference. Think of an Olympic athlete not being warmed up before an event......that's why the oil...
I ran a stick on heater , it was on a BBC single Domiator 540. We found that if you use silicone around the edge of the pad after it has been...
We ALWAYS pre-heat the oil , and keep the heater on between rounds too. :)
The Can in this instance wasn't the issue. A component was not refitted to the car in question between rounds , causing this very unfortunate...
We run the smaller shaft , and run a trans cooler under the back of the car , with a fan that runs all the time the car is running. The extra...
Thanks for the input Bob. Cheers Wayne
Keep us posted :)
166 tooth appears to be the answer , I can't seem to find one for a HEMI crank....
We run LUCAS in our 521BAE. I mix 50 and 70 , with great results. We always warm the oil before start up , and keep it warm between rounds too....
Can anyone shed any light on the new spec regarding 168t flex plates and the can liner issue ? We run a Bruno/ Converter behind a BAE 521....
I had. Similar problem , the switch we were using wasn't up to the job. We had to us a relay to solve the problem. Wayne
Wel done guys , I had a big chief Chevy ....and went with a HEMI Respect......wayne
I have used System1 for many years in everything from a Rover v8 (what?). To my current BAE6 , always been happy. Having not tried any other...
When we started using a 44mag , we would get cylinders dropping under load , the plugs were cracking on random cylinders. The cure was to add...
Check the snout on the blower. I have seen a couple break , in this situation. Just a thought
You guys rock ! I sent my old timer to them for upgrades , awesome service and pricing , thanks guys. UPS , are another story! But let's stay...
I have been using "air levers" , from McAmis. Recently started using Air Buttons , but I have only been down the track once with the buttons , so...
Hey Will even we get the odd warm day at "The Pod" .............
