Separate names with a comma.
What was it they said in a Bronx Tale... "Spoken like a true gentlemen give that man a beer"
I have had the same experience with the West products, that is that once the stuff starts to heat at all the line between some warmth and a...
I had looked at them a few years back and it seemed the TFX ( thanks for the pm AJ 481) was pretty much the way to go back then. I was running a...
That brings up another question, Anyone logging cyl pressure either on the car or on the dyno? It is my feeling that when they get really...
MoparChris440, I helped tune a rear engine dragster last year with a 14/71 hemi and a glide and would love to try it with a set of 1.40 gears...
That 1.40 first gear option sounds like a dream come true for blower cars particularly light ones, you should finally be able to work the...
Yes, generally increasing timing will make more pressure and heat in the chamber these changes will cause the peak cylinder pressure to occur...
I think the classes that will really benefit from that are the ones like drag radial at MIR where the big block is only allowed a 10.2 deck height...
I used to work at a small scientific research company called Research Associates and I recall reading about this problem several years ago. It...
Its does get kinda crazy, But if Sonny can make an engine with 5.3 bore spacing and 5.08 bore and call it GM and CN can make a cross bolted...
And 3 more.... WJ is jealous As far as Mike goes, I learned about "peanut butter" from him, not the kind you eat the kind you use to keep...
On my nitrous motors I used to always debur all sharp edges then use scotchbrite and varsol then cotton and redblock to mirror finish, but this...
Often a stuck EGR valve or IAC valve will cause this kind of problem, have you tried a can of BG44K in the fuel? Pat Goss :eek:
Sorry for the late reply I have been away from the box...As Sodak said I also had the wire in a figure 8. I feel that the aluminum is to weak to...
If I were sitting on 40 cases of 60w it would be a done deal, Brad Anderson would not be able to convince me that 60w would not be the oil to use...
Since no one else has replied, let me add my limited experience. I assume you are using the solid block , I have not had experience with the...
Hello MKR 588, You are correct your grooves are probably way to deep. As you mentioned you only want the wire to protrude approx 25% of the...
Hey Nitrohaulic, This post caught my eye last night, I have never seen these studs and was wondering how they are made, does the 1/2 stud...
Here is new deal they are doing in our area. Your wife goes to the store on the way out she gets in the car and starts it up as she starts to...
Is the motor assembled? It is to a large degree a matter of choice, a lot of people feel that a high horsepower blown alky aluminum engine...
