Separate names with a comma.
Also, Assuming this is a blower motor, is your manifold the type that can leak boost into the valley if poorly sealed? But I also agree with...
God is this an endless debate, I assume you are not running an alternator (never hurts to ask) then 16v is definatly the way to go, you will...
I thought most all of the good rings for extreme heat and pressure were some type of iron? Richard Gavle
When I setup gears for people I always inquire what lube they are using, if using synthetic I always set them up tighter than manufacturers specs...
For what its worth BBC nitrous motors usually eat the even # cylinders first, they suffer more than 1357 as a general rule. Richard Gavle
The Daedenbear unit also lengthens with Co2 and retracts to normal length with an internal spring if you had a hung throttle and it took more...
Hello Mopar Martin, Is this car using a powerglide with a probrake? if so we can set you up. I helped fastavenger588 with his car last year...
Ohh boy, Here we go again......
Are you sure your transmission shift lever is the correct one ( if it is a single hole ) or that you have the cable attached to the correct hole...
Constant flow fuel system techniques This has to be the best discussion of fuel systems and their varied requirments I have ever seen on this...
Also anyone running ORSCA this year due to there being scared of Gil Mobley's Camaro :eek: Mike, I know your comment was not all inclusive and...
Tank size? I agree with the idea of calling Spitzer but if you don't want to buy a tank and he don't wanna give away advice then here goes......
With the kinda senile, half blind, idiots you had working on your car you needed one with crush sleeves :eek: Richard :o Gavle
Material required is 4130 chrome moly (or Reynolds 531), minimum size is .875-inch (22.2 mm) O.D. x .083-inch (2.1 mm) wall tubing with 3/8-inch...
Probably like car bodies and most things these days, when you use computer's, cad and flow dynamics the results are likely to be the same....
To answer the question as to why the require on board starters, In addition to any other reasons a lot of santioning bodies feel it keeps the cars...
Check out the new Outlaw blower DMPE is working on, http://www.dmpeinc.com/current_engineering.php Richard Gavle
When you shift most conventional automatics into neutral at the end of a run the planetaries can rotate at a speed that is the inverse of the...
Are you bypassing fuel (from your pump saver) to your hat nozzles when you shut the throttle? Although this is good for the blower it can be bad...
I agree completly with what Mike said, I helped a friend with his R.E.D. last year it holds about 6.5 plus line volume, we had a delay at the...
