Separate names with a comma.
I have a bbc 12:1 40 psi boost alc. 4.560 bore, hell fire rings what is the min. top ring gap?( was thinking .030 ) This is a boat wet...
What is the max? Mine is 3/8" thanks Craig:confused:
CHECK THIS OUT http://fuelinjectionent.com/webstore/product_info.php?products_id=162
I have buddies that have ran them with good results. But after a lot of reading I am wondering if they filter enough debris out of the oil. Have...
How far away could I get by with using a system 1 oil filter and adapters with -10 hose and fittings? 50-60 weight oil I need to run trough 4.5...
Does anyone personally know someone that works there ??I sent my cam to them to have it checked. I had them make me a new one based on the one I...
What would be the best bearings to use?? We do not tear down but once a year. 35-40 boost THANKS CRAIG
I have a friend with a 548 BBC brodix big brodie 2 heads no port work. It was originally set up for an 8-71. Cam is dur@50 285-288 valve timing...
I just found out my crank is cracked.So I am changing directions what is the best deck height block/rod length/stroke/bore combo ? going to run...
I have a dart big m bbc. What would you say would be the max bore size? And still have enough meat between the cylinders to keep the head gaskets...
Can sleeves be bought or other types modified?:confused: I was told kb is out of business :eek: thanks Craig
What should the fuel psi be at the ports if running 40 psi boost I figured there is a split ratio or the mixture could be lean.( new to high boost...
I have a 12.5:1 468 bbc 14:71 hh delta bottom. I am changing from 40%to 52%od crank rpm 7500-7600 how much hp/torque would this gain if the afr is...
How much HP is needed to run a 14-71 HH retro 52% over 38 - 40 psi I was thinking 350 ?? Just a guess :confused:
Has anyone ever seen or heard of boost hampering the intake valve from seating on time causing it to lash the valve train ? I turned the boost up...
Has anyone had any problems getting a call back from them, or do they only sell trough dealers. Have talked with them twice and they say they will...
:confused:I need a #8 union fitting to connect two hose ends together that you could put a 1/8 npt in the wrench hex/flat or the short story I...
What are the odds that a bird on a 14-71 hh delta at 52 over and 78-7900 rpm would have a vacuum present in the hat? Just wondering and how much...
Is there a cheap brand that will get the job done ? I will be using it for light duty applications valve covers ect. THANKS CRAIG:confused:
What is the diff. between the K8,k9and k11 rotors do they get larger in dia.:confused:
