Separate names with a comma.
Anyone know how to stop primer nozzle from leaking or not closing completely. When I blow air in normal fuel path it works but when I turn it...
Anyone know proper routing of green red and black wires when used with mad 12 amp mag and converter box. For an automated pro comp 2 tach.
What timing should I run. 528 hemi 11.6.1, 14-71 1to1 and 20 over.
Could I get a timing recomondation for a water cooled blown hemi with stageIV heads on methanol. 11.5.1 dmpe superman 14-71. I am running 12 amp...
Well need help my hoses started leaking. Bad crimp joints. So had new hoses done. While jacks were collapsed I hooked up new empty hoses. Cycled...
Does anyone know what damage i did to my electric konis shocks with sweeps. when a buddy started welding on my rear end. Smoke started coming...
Anyone know where to run the black wire from the rpm port harness. I have a 44 mag for track and 12 amp mag for the street. I am running a 6...
Anyone know why autometer electric fuel press gauges are not compatable with methanol? Can they be made to work? I have not called them yet....
What is best way to plum a remote fuel primer system for trouble free operation. i was thinking of running a fuel line from regulator up front to...
Have any of you guys run tire balancing bags that have sand in them to balance slicks and front tires. Do they work. Any pros or cons. Thanks cj
Building stainless collector headers for promod and and i want to put bungs on underside of primaries. How far should they be from valve stem or...
I suck at wiring. And I have a dump question. Will welding a bracket to a chassis via rig welder damage electric fuel pump if it were connected to...
Can anyone give me the pros and cons of towing with a tri axle 50' fifth wheel race trailer. Things such as dot, scales, wt issues, laws... I am...
What is the norm or best location, distance for egt bungs. Does it matter if its headers versus zoomies. I am going to build a set of ss headers...
I was told that prism blower gel is not as good as jp1 or Andersons product. I was told prism ends up in runners and on piston domes, and washes...
What is the best fuel sys flushing storing proceedure you guys use. what lines are you connecting disconnecting... With marvel mystery oil of...
Where is the best place to by blower gel and remover price wise that is. Thanks guys c.j.
[CAN ANY ONE OUT THERE ADVISE ME ON WEATHER ITS POSSIBLE TO PULL CRANKCASE VACUME WHEN USING TWO SEPERATE SPIT TANKS WITH QUICK RELEASE BLOW DOWN...
I would like to know what the pros and cons are on these units. Fire away Thanks guys:confused:
Anyone Know if there is a website for the guys who mfg the bull clutch grinder? Any one have pics of the bull? What do they cost new? Any one...
