Separate names with a comma.
I'm Running A Buzzard Hat On A 14/71 Hihelix Blower How Many Hat Nozzles Shouls I Be Running? I Have Seen People With 8 On Each Side And I Have...
We Will Probably Be Getting Another Blower Soon Just Wanting Opinions On Which Way To Go First We Cant Afford A Psi Screw Or Roots We Are Looking...
I Have A Buzzard Hat And I'm Looking For The Bearings For The Throttle Shaft Where Can I Buy These Thanks Jamie
I Was Reading A Article About Fuel Systems It Said The Hat Nozzles Should Be Aerated Type And The Port Nozzles Should Be Non Aerated I Have Never...
What Is The Difference In A Alum. Buzzard And A Mag Buzzard Other Than The Matieral They Are Made Out Of? Any Performance Difference Etc. Thanks Jamie
Who makes a mag stablizer bracket for a super mag I run a front mag drive and its sits out there.just wanting to put somekind of stablizer on it...
Who Does A Good Job Of Designing Tee Shirts But Is Reasonable And Can Do Or Have The Printing Done Also Thanks Jamie
What Size Is The Oil Temp Sending Unit That Works With A Datalogger?
Is It Worth The Money To Have A Clutch Dyno'ed Will It Give Me A Good Starting Point?etc Thanks Jamie
What Are Most People Useing To Lube The Ball On The End Of Pushrods And Rockers With I Have Heard Of Peanut-butter Lube But What Is It? Who Makes...
What is a davenplate? What does it do? Thanks
By Reading All The Post About Data Loggers I'm Going To Get A Rpm Data Logger Now My Question Is What Should I Start Out With (sensors) I Have...
Ok Im Going To Show My Stupidy Now. If You Have A Fuel System And Was Told Its A 1/2 Gal Rich How Do You Figure How Much Fuel To Take Out (i Know...
DOES ANYONE USE A PRERACE CAR CHECKLIST AT THE SHOP BEFORE GOING TO THE TRACK? I HAVE THOUGHT ABOUT MAKING ONE UP BUT BEING NEW TO BLOWN ALKY I...
I Have Read Many Topics On This Web Site I'm New To The Blown Alky World Always Had Door Cars With Carbs I Have Learned So Much From This Site...
What Is The Difference In The Red Top Mallory Coil And The Black Top Some Refer To The Black Top As A Nitro Coil Just Wondering Thanks Jamie
Anyone Run A Fuel Filter? What Size Inlet Line? What Type Of Filter, I Was Thinking Of A Small Oberg Type Any Ideas Where To Locate It Between...
I Have A Dunn Front Mag Drive For A Bbc And I'm Running A Supermag 4 I Have The Dunn Cross For The Bottom Of The Mag And The Drive Is Set Up For...
WHICH TYPE OF NOZZLE WORKS BEST FOR PORTS WHERE DO YOU WANT THE DISCHARGE IN THE CENTER OF THE PORT OR JUST INSIDE I HAVE SEEN LONG AND SHORT...
What is the difference in nozzles enderle, waterman, drop in jets aerated non aerated etc which work the best and why I have seen some that look...
