Separate names with a comma.
I am running a CS-2 lenco, shifting it with 250 psi co2 and I need to find a pressure switch for CO2 that will close as soon as you apply...
All, I am Running a blown alky dragster 275 inch in the 5.90 to 6.20 e.t. looking for a good all around slick 34.5 17 16 had ran the M.T.'s with...
I have been running a power glide for years and I have back halfed my dragster and installed a bruno and a 3 speed CS-2 lenco Trans , 500 inch BBC...
Who makes a good weather station at a fare price for a blown alky applacation ? what are you guy's using out there? Thanks Butch
All, I am running a blown alky BBC set up, the heads I run are the dart 360's with the dart CNC porting, and they flow about 365 CFM with my...
I was trying to get some info on adjusting the trans brake band on a Bruno, does any one know how to do this and how often it needs to be done? we...
I have a 270 inch RED chassis, Blown alky set up brad 5 with 206d , getting it back halfed this winter, a question came up if I should us blow...
Were is a good place to get a chrome molly 1/4 inch motor plate for a BBC in a dragster? any help would be great thanks
We are running a new centrey block 10,200 , 500 inch, Dart 360 heads, 206D screw blower 50% over, 44 amp mag, base compression is 12.1 to 1, the...
I am installing my 8973 box, I do not have a crank trigger on my 44 amp mag. How fare away from the Mag can I mount the 8973? and is there a cable...
All, what I need it the diamension from the center line of the axle to the face of the drive coupler, for a 9 1/2 top loader ? thanks again for...
All, I have a question, I am running a 206D on a BBC, we are only running it at 50% to 60% over drive depending on C.A. , My question is what...
Does anyone know were I can buy a valve that will open with CO-2 that I can run Akly through for a hi speed? The only one I can find will flow the...
Hay all, I could really us some help, I run a BBc/206d/44 mag, set up we are making about 2300 hp in a rear engine dragster and for the last few...
Does anyone know who makes a good alum rear wing that will not break the bank? I am running a rear engine dragster at about 240 MPH, low 5.90's...
I Am Running A 206d On A Bbc,44 Amp Mag, 8 Nozzle System. I Am Putting Out #2 At A Idle, And At The Hit there Is A Hesitation sometimes, it seems...
I am running a BBC, 500 inch ,10.200 deck, Dart 360 cast heads, and a monster glide. We run 6.0's 225 to 228 mph and about 45 psi boast. What I...
