Separate names with a comma.
I am trying to understand how a management system works. If you retard timing and remove fuel have you offset each other or will this reduce...
How is the easy way to remove sleeves,have the slide hammer but seems to beat the block up. Any other tool better?? Thanks Randy
Where can I buy a small on board 12 volt battery kit,something like makita or cordless tool battery and holder? Thanks Randy
Thanks for the input,I will keep going after the nozzle and replace the hose on that cylinder. Randy
I have one cylinder that the egt is hotter,port nozzle not changing it much,Has anybody put a shorter rod in one hole if so how much shorter?...
Has anyone installed new compression rings &/or oil rings without honing an engine? Sometimes don't have time to pull crank to clean bore....
Noel The stroke is 4.150 Thanks Randy
alcohol engine I need to buy a new block is it worth the upgrade charge to go ahead and buy the 60mm camshaft.(new cam, pushrods). Would I be...
I have a Bae with roots blower that is an unhappy engine. I need to take it to a dyno shop that understands fuel systems and make some pulls on...
I hurt my 114 centerline cam in my bae, I have a 116 center line cam same lift and duration can I install it and advance it 2 degrees with the...
My bae with 8 easy runs the 2nd ring grove collapsed at wrist pin on 3 pistons, no sign of detonation on bearings or egts, i did get the engine...
???? What % of leak down should you have on a bae alky engine? roots 14/71 Thanks
Clif I bought mine from pegasus racing products, pegasusautoracing.com Randy
I need to buy a awning for the trailer with quick disconnects, any advice on the best & easy to set-up brands. Thanks Randy
I took my superman apart for maintenance. The gear on the left rotor has had the master spline changed then they moved the gear around about 3...
Also on the same line. My hemi cam is in at 34*@.050, if i move it to 37*@.050 will it retard the cam or advance it 3*?? Will it change the intake...
Anybody rebuilding crane lifters?? If not what brand should i buy for .903 bae hemi thanks randy
thanks top alky 511
On a bae main cap tang can on either side. Does bearing tang go together or does it matter?? Thanks randy
