Separate names with a comma.
The reason you have to push the button for reverse on the pro style (fluid exhaust) valve bodies is because the VB manufacturers found that they...
Yes, but this is also one of those things that everyone approaches differently. If you are bracket racing the car you might not want to be as...
Head temps The "hands on the head" method is pretty accurate, but if you want some numbers to go with it; 1. If you can hold your hand on it and...
I was curious if anyone had tried using shock damping to combat torque steer in a four link car, as in tighter rebound on the left shock. I have...
Rev limit failure I have had both two and three steps fail at most inopportune times. Having yours give you grief in the shop is a blessing in...
The pressure in the cooler is determined more by the size of the passages in the return section of the trans itself. It (the cooler) is fed...
We have a few converters that we use, but the current one is an FTC 101 which is a 10 inch torque converter that stalls about 6500 to 6800...
More about ratios There sure is a lot of good info in this thread, so maybe I can add my $.02 worth and not sound like I am completely in left...
I tried in vain to find this information too, Casey. I was also looking for height of the staging lights, separation of the staging lights,...
Heads We have been having excellent luck with our conventional Brodix 2x's at about that performance level. They are holding gaskets well and the...
Chassis As far as I know, we are the only ones running an altered in top dragster in div 2. It currently lives in the 6.60's. The person, whose...
We are currently running a 7AL-2 in an altered that runs 6.50@209 with a 14-71 at 20# boost. They are correct in telling you that if the tune up...
Is this car suspended or a hardtail?
No silicone, just the green gasket with the screen that keeps rocks and small children out of the blower. When did the standard become 0.012"? I...
Right now the butterflies are at 0.011". During the time that I have been chasing this I saw the deflection you are referring to and opened the...
That is interesting VW, because the quick release plugs and minimizing the butterfly setting is what the Top Alky guy reccomended (I didn't get...
I have had that attitude myself for a while Don, but Fast Eddie (Carecchia - I think) makes his digger idle around 1500 to 1800 with a nice Top...
I went back and looked at the datalogger, and the fuel pressure at the nozzles is between 0 and 1 psi. I think if I actually had much more than...
12 psi on Idle bypass (secondary bypass) More info: Waterman sprint 1000 pump (10 gal) 95 Main jet (currently)Nozzle and jetting set to return...
I have been plagued with this problem for a while (idle surge, hunt, etc.) sometimes I can get rid of it, and other times it's right there. I...
