Separate names with a comma.
Just make sure you put them in the correct way. Once there in there they are hard to get out. As me how I know this:o
I have some 5 year old Penzoil I use. I contacted Penzoil and basically they said the oil won't break down it just seperates, just mix it REALLY...
I use a Milwaukee M18 battery to run my electronics, and as Mike stated, be careful because when you pull the battery off the charger its more...
Ya,this is how mine are with the little 1/4" bolts. I welded the things solid anyways.
All good Info, welding the stands is what you need to do. I also blasted all the black coating off before welding. I think its anodizing, I tried...
All I know is get a crank thats made of good material because when you need the journals welded you will be glad you did. I'm glad I got a quality...
I just went to a local paint ball place and got a complete fill station, hoses, valve block, the works for $150 bucks. Just have to get a bult...
The armature looked like it had 1000 starts on it. Brand new starter, actually knocked one commutator bar right off the armature. Just a very...
Ya ,thats the key. Use a GOOD quality starter designed for 24 volts.
This is what I did ^^^^^, worked great. I just use a an 18Volt Milwaukee tool battery to run the electrical on the car. Picked up a billet...
I just fired my 540 the other day, used a power master starter, hit it with 24volts. It melted in about 6 seconds. Called Tony @ GPE starters...
I just installed a 1.25" inlet in my tank (from 1") and I have a #10 vent, did the fill with water and let drain, whoosh no problem. If you are...
When I was troubleshooting my lifter issue, I pulled the bad one out of its bore with the drill turning the oil pump and it was like there was...
Suprised about the lifter, its a Morel, supposed to be real good, oh well, it happens. About the other problem,:o Ya, that was my fault.:o I...
We have a winner!! I had a bad lifter, swapped the suspect one to a different hole no oil! While old postion has oil with the different lifter....
Thanks for all the info, I just ordered one, I'll just figure out a mount when I have it in my hand. Bound to be someplace I can stick it. Corey
Number 8 Intake. As of last night I have 2 1/2 hrs of priming on that rocker and virtually no oil. I'm going to pull the manifold and start...
Figured I'd Start big and go down from there. Corey
Yes it has restrictors (.125" pretty big), funny all the rest of the rockers are pouring oil, (more than I would have expected with restrictors)....
I'm pretty sure its just a piston with air on one side and oil on the other. When the oil pressure is less than the air the oil comes out to feed...
