Separate names with a comma.
I'm starting to figure out I'm not going to run this type of system without refilling the tank every run? This is a 7.0 nostalgia car. I'm used to...
Vic, this is the problem. I can fill the tank,4.5 gallons warm it, and the tank only has 2 or 3 quarts left when I shut it off. I spoke with...
Vic, I started with 5 in the pan and 13 in the tank
The filter in line, looped through the pump. -16 from the tank to the pump. -12 returning to the tank from the pump. -8 vent from the top of the...
Thanks for the input. I will give Steve a call. The oil is getting back to the pan. I pulled the covers right after the run and there was not an...
I had my car out friday for the first time. 496 TFX an alky. Ran it to the 330, idled the rest of the track. My 18 qt oil tank only had 4 qts left...
Looking for a local source for late TFX gaskets (pan, timing cover). I'm in MI. Thanks Steve
Robert Reehl sells a nice angle drive, reasonably priced
Any one using the new Brooks V-2 Hemi rods? Opinions?? Thanks Steve
The best replacement block I found for my blown up Chevy was a TFX!!;)
Check your crank. I had the same issues last year with my Chevy. Ended up pushing the crank out of the pan. It tried to tell me, I did not listen....
Thanks for all the input. Robert I will be in touch. Thanks Steve
I am finally wising up and switching to a Hemi. This will all be new to me so I am looking for some guidance. I have; TFX96 block standard...
Scott you may be right on about the pin. They are/were factory size pins. The rod/pin pulled out of the #2 piston. Thanks for the input. Steve
Timing @32, Heads are Bowtie water, Mallory SM V, Pump is an Enderle 110. Block is filled. Thanks for all the reply's. I understand buying an...
Over the weekend I knocked half of me crank out the bottom of the block. I don't have it apart yet but in appears the crank broke at the #2 main....
Jim, I just went down to 5.5 from 6.5. It was hazing the tires at the shift's. That went away, and the 60 picked up .02. Steve
Kyle I most likely would except you told my dad what your dad always ask's you...."How much did that cost stupid"!!! Now I here it on a daily...
I am trying to improve my 60' time. I think the tire is "wadding" up to much at the hit. Any thoughts. Car is 2350 with me, 477 Chevy, 871, 3...
Thanks for your input Mike. I am going to call them also today. Steve
