Separate names with a comma.
THESE ARE ALL BOTH FROM MY DOOR CAR AND HAVE GONE 4.09 AND JUST WENT 4.13 A FEW WEEKS AGO IN SOME WARM WEATHER. Only one left now - CS1 3 SPEED...
I have been running a clutch and a 3 speed lenco for 15 years - looking to change to a lencodrive - roots blown hemi w veney heads - 9000 shift -...
OVER THE YEARS I HAVE COLLECTED A TON OF CYLINDER SLEEVES - AND I REALIZE - I DON'T NEED ALL THESE MISC SLEEVES. NONE OF THESE FIT MY CURRENT...
I NEED SOME BAE / TFX SLEEVES 4.310 BORE & 4.375 BORE RIGHT NOW I NEED A 4.310 BORE SLEEVE ASAP I WILL NEED FOUR 4.375 BORE SLEEVES 6.800 LONG -...
OK this thing is killing me - 5.14 gear - 1/8th mile - veney alcohol headed hemi - 3 speed lenco - WITH A CLUTCH - 2470 lbs - 526 ci - Kobelco...
Mine measures 8.812 overall - its in a 8 1/8 clutch can - must be fine spline lenco end and 1 3/8 10 spline clutch side - used in good shape...
I need a 10 inch FORD ring and pinion - 5.00 or lower - 5.14, 5.29 etc - new or used in good shape - must be a 35 spline pinion (that"s the big...
Just pulled my heads apart I need valves fo my Veney alcohol heads. 2.500 x 5.650 x 11/32 x beadloc preferred x flat top - need 4 of these - or...
I need a blower pulley asap! Blower pulley - 27 tooth - with a .750 offset - in really good shape - mag or aluminum - 14 mm GT. Email is...
THIS IS FOR THE WHOLE DEAL - 14/71 MOONEYHAM STD HELIX MAGNESIUM CASE SUPERCHARGER IN REALLY NICE SHAPE WITH A MAG SNOUT - ENDERLE MAGNESIUM...
Got em - THANKS!
I need a JBR OR CFH carbon 4 blade hat injector with a 10.5 bottom opening must be decent shape. I also need either a 5.00 to 5.29 BIG pinion...
New set of Fowler Billet aluminum rods 7.176 length L19 ARP bolts Hemi - 2.500 big end bore & 1.094 pin $500 BAE / Veney hemi head tools, spring...
All are sold
Need a set of gears - used in great shape ok - 9.5 ring gear with the big 35 spline pinion - ratio of 5.00 up to a 5.30 would work - prefer email...
I just got these back from Chris Bell at Kinetic - decided to go with some Penske shocks - these are the 19 inch extended aluminum body DBL...
LOOKING FOR A HEMI ALUMINUM BLOCK - EITHER A KB STAGE 10 - THATS THE ONE WITH THE MAIN OILING PASSAGE UP BY THE CAMSHAFT OR A BAE BILLET OR CAST....
36 used hemi head gaskets - used with brad heads in an alcohol setup $300 shipped 8 je big fc-1 - 4.471 bore pistons for a brad fat head nice...
Two new xceLdyne titanium exh valves $75 I have a set of eight xceldyne titanium intake valves for brad anderson six heads - 2.400 x 11/32 x...
Ok I started this car a while back - and its in a million pieces - but all good stuff - car was run but not with the new body and updates - OK -...
