Separate names with a comma.
Ok so i go to put jets back to an original tune up but along the way the original jets got mixed with some others of the same size so now the...
We are having some fuel issues and i can kinda figure all of them out but something that has me stumped is that in the last couple of races i get...
My headers are kinda getting warped at the flange and i am looking for a thicker gasket to help seal ? I am using copper ones now and they leak a...
Anybody have any idea why the crank bolt keeps coming loose on a hemi ? I know detonation will cause this but we have no sign of it and it runs...
i am in need of somewhere to purchace a blower bag and have some restraint tethers repaired on a tak restraint i have called all the one i know of...
This will be a little hard to explain so here goes...... I have a big and ugly with a new k valve it was all set uup by a guy who knows his...
Is there any where a guy can get some guidelines on what pressure to run and how it affects the launch with different pressures ?
I know it has been done to death but i have searched and cannot find any info on the effect of low intake spring pressure ? I have been fiting a...
Is there someone who makes one to pull the fluid out ,cool it then pump it back in ?
Who makes the best on for a fat head ?
Has anyone had issues with a whipple where it seems to flutter boost ? If you look at mine on the graph it jumps up and down very quickly all...
I need a crank trigger pickup and have been trying to call them all week and sent a email am i doing something wong ? First time i have tried to...
Can i hook my oil accumilator up to the extra port on the outlet side of the oil pump on a hemi ?
I have a 7531 box on a promag and i think it is either set up wrong or has issues when it puts the timing back in after the launch retard it...
We have a shootout car with a new dart cast block that has split the main saddles up to the cam who makes a aluminum block that will take 40lbs...
We tried using m rod bearings to tune a hemi with 40 plus lbs of boost on the dyno and at the track and had issues is there anyone who can put...
I got a 14 degree in a screw blown hemi how would it effect it to go to a 16 or 18 degree ?
if it measures 64 inches around all the pulleys how do i find the correct belt length ?
Trying to lap the plates in on my waterman pump i have a small lapping stone and it seems like it will take me years to get them to fit they need...
Ok so the rule is you need .50 gap between the coils at max lift....according to the spring people but if you have a fat head with a .500 lift...
