Separate names with a comma.
as far as making a LB-20 16-71, we can't do it, our machines are maxed out on travel,the LB-20 14-71 is the biggest we can make.
the LB-20 is a new design, it has inset bearing plates, 2'' in frt .200 thousands rear, the top opening is forward of the rotors and directs the...
sorry you couldn't get a hold of me on fri, we close at 1:00 on fri we have 4-5-6-7 and 8 5/8 inch snouts available, as far as benefits of...
They both work fine, in a case where the blower comes off and on a lot I would suggest an o- ring, because the gasket can stick and tear, there...
Oops, typed in wrong number 714-992-9292
We have sheets of it that are 22x13, how many do you need? Lttlefield Blowers 714-991-9292
Rule of thumb is, if both blowers are identical, going one size up it's about a 6% difference, as far as us building a 16-71 LB-20, we can't do...
It depends on the overdrive, the critical number is rotor RPM, a high helix won't hurt, at lower RPM, but sometimes there's no need for the extra...
I'll answer your questions as you asked them, A frt discharge (retro) makes more boost and is more efficient, therefore takes less power to...
The high helix came out in the late eighties, shortly after that, it was discovered that a frt discharge worked even better, so customers would...
The LB-20 has an inset front bearing plate of 2", that moves the rotors back but keeps the opening pretty close to stock location, now keep in...
Retro is another name for front discharge, we retrofitted a high helix back in the day and that name stuck, our LB-20 is a frt discharge blower,...
And if I remember correctly, it had an AJ olds in it, his crew chief was Paul Kunke out of bakersfield
What is the actual length you need? We have some 3.300 long, Littlefield blowers, 714-992-9292
Look at it demographically, draw a 200 mile circle around Indy, now draw one around Orlando, that's what I did to decide and I had been to both...
Well said Will, and if you do choose to come to the IMIS show, be sure to stop by the Littlefield blowers booth and say hello, this year we are...
The air travels down the length of the rotor, in simple terms, think about going down a spiral staircase vs a std one, you can't go down as fast,...
The. Rotor diameter is the same as long as there the same style@ k8, k11 older versions, the air speed difference is in the twist of the rotor,...
Clean real well and high temp paint, ive seen this done before, last for a good while
We can anodize it grey or black, just call littlefields and I can give you a qoute on price
