Separate names with a comma.
Depends on where the crank needs to be corrected. If it is heavy on the counter weight side you can grind/shape or drill the counter weight. If it...
According to Bob "I'm just a welder" Meyer the T handle in your hand to tighten the lock ring is the right size. 3/16"
Gary, fitting closest to the block facing rearward is from pick-up in pan. Fitting closest to block and head facing forward goes through filter...
Call Robert Reehl 626-815-8815
Use a #8 flow meter it will measure up to 25 gallons of flow. Plumb from barrel valve to meter into Y fitting. One side to hat the other to ports....
David, I would recommend a Miersh manifold and 14/71 hi helix. You may have to go to front drive dist. If you have any questions give me a call....
Guy going in is Russian.
Yep thats a good number.
Call Bob Brooks at AFT. He can set you up with the levers, cross shaft, arm, cannon, air charge button, and release system. Sounds difficult but...
Dragsterbus, K-line makes liners for .375 guides. Contact your local machine shop and have them install the liners. I would recommend .0015-.002...
Oversize pins
I have been using a V300 on my top fuel sand dragster for 5 years. The only problem I have ever had is the flow meter. I had to posistion it...
With a daul mag setup you should be using handcuffs. Also instead of the stainless band clamp there is a billet aluminium clamp that holds the mag...
Anytime you back fire the motor it can blow the intake valves open. The valve that is missing the lash cap may not be the one with the problem. I...
Have you tried the billet clamp?
Rod check your PMs
Yes KB made a few forged blocks.
Torco is a 52 gal drum. 800.00. Hi Nick
