Separate names with a comma.
hi all! are some of you using M/T 34.5x17x16 tires in a blown alcohol door car application,with beadlock wheels? if so,what compound are you...
hello everybody what size bottle is most commonly used for an air shifted 3 speed lenco and how many passes do you make with it? application is a...
hi all! using a KB block in a door car,with a P&P wet sump oil pump and moroso pan,i have the following options regarding the oil filter...
hi all! one question for those running an automatic trans in a door car:do you mount your transmission crossmember solid to the chassis? distance...
merry christmas and a happy new year to ya all! i'm about to buy a small lightweight shorai battery to run my electronics and would like some...
hi all! is there an "average" idle rpm to shoot for in a roots blown alky door car,as 1800 rpm seems to be the norm in screw blown door cars:same...
Hi all! i need to buy exhaust donuts to complete a zoomie header kit,in 2 1/4 diameter:who should i buy from? i thank you in advance cyril
hi all! i need to mount a throwout bearing collar inside a trick bellhousing. the bellhousing (used)was purchased with a large center...
hi all! i need to buy a helmet for the upcoming season. i'll be driving a door car,blown alky engine. i'm considering a simpson X...
hi all! i need to make a set back plate for a standard helix 8.71 khul blower with a big bottom opening,run at 34% overdrive. it is to go on a...
hi all! i have a KB big block wedge block with oil restrictors in the passages between crank and cam. this block was previously used in a...
hi all from experience and/or knowledge,could someone tell me what the optimum rpm should be on a standard helix 8.71 blower? (seals are in good...
hi all! i'm currently having a new blown alky mopar wedge engine built(KB block instead of cast iron production block),and increasing...
hi all! this question might seem a little stupid,but when setting up the crank to rearend alignement,i see a big difference between the old chevy...
hi all! in an injected alky engine,no blower,and using a blower starter with crank pulley and belt,should i use a crank hub and crank pulley or a...
hi all! i need to buy wheel bearings for 3 sets of front anglia spindle mount wheels,from 3 different brands: it seems weld and american racing...
hi all! i am currently converting a blown injected alcohol wedge mopar engine to normally aspirated injected alcohol. i have no room for an...
hi all! i have a used velasco hemi crank with 3.530 stroke that the Velasco company said they originally built for a racer that ran unblown...
hi all! i recently purchased a set of radir 12 spokes wheels,18in dia X 4in wide,with spindle mount centers for my altered and was wondering what...
hi! could someone give me some information about the build of an unblown,alcohol injected motor? i have a mopar big block wedge (cast iron...
