Separate names with a comma.
After my first pass witht the engine in front of me, I'm definitely never making another pass with aerated nozzles. Planning on using non...
I switched combos and need to move the blower forward so I bought a snout and coupler that supposedly would work with my SSI f3. The...
BBC in an OLLD Prostocker. The drivers side lower bolt wants to be in the same spot as the steering shaft. Not many options for moving the rack....
I have a current 14.1 restraint but need to go to a 14.2 bag. Can I just buy the bag and use it with my existing stuff? Also, I run a dual gear...
I need a 4 or 6 inch snout for my SSI F3. I Also need a good blower guard that will keep the hood safe on a door car. I have an 8 inch snout to...
SSI F3 on a BBC. 1 to 8 are only a few numbers apart except for #3. I'm 6 sizes bigger nozzle than the next biggest and it's still almost a...
ive never used a lean out, only used timing for wheel speed, so maybe I'm out in left field, but I would like to try to add wheel speed at a...
Please educate me on pump loops so I don't have to go do the math myself. I have two cars, one blown, one injected. The injected car has a giant...
I need to take apart the 7-inch snout off of my ssi. Single bearing, driveshaft is part of the pulley flange. Looks like maybe a spirolock type...
I bought a few year old tank off of a member here. I think it's 3 gallon. Two 1 1/4 inlets and 1 3/4 outlet at the the top rear of the tank...
Enderle bird 12.25x4 opening on a ssi f3 with 11.5x4.5. Shelf in the back when looking along the airflow. Max rotor rpm So far is 11,400. I...
Broke my 07 littlefield hhr. Trying to replace it with something as good or slightly better. Does a k8 superman or an ssi d rotor fit the bill?
I found a crack/hole in #6 runner about the size of a quarter slot. I epoxied it up for now. 1. Any chance the epoxy will hold at 35 psi? 2....
BBC, copper cometics, orings in the heads. I marked the gaskets clearly when pulling it down. I laid the gaskets on the correct sidesof the...
1471 hhr littlefield bbc. Delta is centered on intake. Each side, from front to back, has 3 hat nozzles, 4th is plugged, nozzle in the blower,...
Head needs welded from a burnt gasket, hoping I don't need to pull the block down too. There is some copper coating on the block and oring in two...
14-71 enderle setup on a bbc bracket motor. I was pretty happy with the way all of the plugs looked at the end of the year. 32 degrees was about...
I know it's not a great idea, but how much power have people made? Seems like at least a few procharger motors are big bore? My mls gaskets...
I have an old set of downswepts that need retired, thought about cutting them up to build zoomies. How short is too short? What is the risk of...
Was starting to get the combo sorted out on my bracket digger, 4.25@166 to the 1/8 at 12% over and pretty tame on fuel and timing. Then it...
