Separate names with a comma.
Do not want to steal this thread, but I wonder how this would apply to my hooptie? bruno/ lenco, 2 speed, 1.68 first gear, 4.10 rear gear, 33.5...
rpmperf.com got one on my wanna be promod, and its the best 2300 doller part i have put on car. no problems ever over a year and a half and the...
i agree with flash. I only have myself and one volunteer with average of 45 minutes between rounds. I have no knowledge on the clutch, and its...
you need to adjust the push rod to get a slight drag on the front brakes. I bleed the master first, then start at the wheel fartherest from the...
my 526 with a bruno lenco and coan mega converter idles well at 1900 to 2000. howard
OK finally got my notes and TFX said to put a .045 restricter in the even cylinder bank and none in the odd bank, just put the set screw in the...
I called TFX and got the numbers on the restrictor size last year and thats the way it is set up, dont have my notes with me ,but I think like a...
good luck,many have asked that question and many answers. I run total of 19 and still run out in the 1/8. 16 in motor, 1 in filter and 3 in...
Could any one tell me a formula for converting weight into ET? I know 100# is approximately a 10 tenth in the quarter, but what about the 1/8 th...
give Justin at competitiondesigns.com a e mail. he does excellant work and very affordable. he did my race site brownmotorsports.net, but he will...
dave, i sorta have the same issue. 526 hemi,system one pump,rock crusher system 1 filter, 3qt accusump. synergyn 70wt switched from royal purple...
I am looking too, maybe we will get some info soon.I am on a tight budget and looking for convience not necessity.
how does the cap look, i had a bad cap cause similar problem.
taylor is 714 630-7850:)
2 speed lenco.
Can any one give me a pointer on a economical way to electric shift a bruno/lenco combo? I have heard of a few guys using ACD controllers.I have...
Gentlemen, thanks for all the help. Ora's it is. Ordered it yesterday evening and will be here for testing at the track saturday if the weather is...
Can anyone recommend a good quality valve lash adjusting wrench for a AJ hemi? i have tryed several from jegs etc and the are junk, broke after a...
Shawn, got mine from wizards warehouse.
MIKE, I am running a tfx hemi wet sump and have a crank centerline of 10.5 inches in my 68 camaro. I have heard that 10 inche is optimum in a door...
