Separate names with a comma.
randy at RPM times 1000. you the customer is his number 1 concern. answers phone damn near 24hr day himself:D
Danny I used a 180 and your welcome to it if u need to save some $. Howard
Hey Ken, what do you mean you were not happy with the results of the larger motor. I am thinking droping the cubic inches/torgue might even help...
I recently lost a motor and in the process of rebuilding and have a choice of combination. i had a tfx, 4.310 bore, 1.156 pins, 4.5 stroke for...
just like blown says, but take out the bolt holding the snout on at 3 o clock or 9 o clock and fill till oil runs out that hole and put bolt back...
hey will,my timing is 36-38, but they are big chamber fuel heads around 11-5 comp. I will be pullin timing this year also just the air throttle...
is there a difference on bypassing fuel on the 2 step between a converter car and clutch car? i would think a clutch car on the 2 step at 5000...
mike, thanks for all the knowledge again, that will keep me busy this weekend LOL Thanks every one else on the input. Will i gotta try to...
I am in the same boat, CRANE has my big 48 degree core also. guess i just lost 500 plus:mad::mad:
ok i finally got all the parts in to set up a crank trigger and 8973 and have a few questions. 1- I can only set up the crank trigger on the...
dave I have auto and u gotta have them! Very simple to do and all hardware about 100$. I can give you a pic of how simple, just how do I post them...
I pull the chute,shut the fuel off and as she leans out a little I bump the mag kill. then i pull the trans back into low gear to free wheel, now...
I only speak for my junk, I have to basically look for great deals on hand me down parts, mainly top fuel stuff but if you look real hard u can...
Jason, not sure if this is the FUEL HEAD you are refering to, but I run AJ stage II fuel heads on my blown hemi.
I use a scuba bottle and the first stage regulator with yoke to fit bottle and a braided hose to go to my bottle in car so I dont have to take out...
all of the above, spent alot of money and bought alot of new and used parts from Roger and always very proffesional with the used parts being...
Danny got mine from tom at wizards, best price i could find and also got a sleeve of uppers only. bottoms stay like new for some odd reason,...
Chris i turn any where from 8200-8500. have slipped a few times when flywheel bolts broke twice and went to 9200 and 9600. my average boost #s are...
I run venolia rods in my blown hemi with the black tapered washers and I torque to 90#s. never had a failure on the first set with over 80 runs,...
Look for new classified add by brandon mckinney and call him, I think he is helping clayton out.
