Separate names with a comma.
Od? It was old 1/2' stuff. If I remimber, we ran about 35 over with an old Don Hamton. 8/71 with a boat style cooler under the blower. We pumped...
SBC on CH3no2 Tink, We ran with the Hot-Rods from Hell in the late 90's with our blowen 350 CID. Our set up was a barn door with 55's all the...
Tinker? Tinker Gladen? Did yoyu guys do the pinks thing yet? Bob Lupini
At some point, I think that the amount of air that could flow thru the injector would come in to play. I think that a low pressure area would take...
Found one Dunn in Texas makes it Thanks Bob
Does anybody make a drive that coverts a older wide 2 pin base to a cloverleaf style mag? Thanks Bob
From NHRA.com Powers Motorsports and Valvoline to part ways in 2007 Top Fuel team owner David Powers has announced that he has elected not to...
All the other stuff I had was 9/16" this is the first 1/2" What are people torquing the heads to? 526 KB 6 AJ Fuel heads Thanks Bob
We had the idle check valve in backwords once and would do ok till we put a load on it. We used up a few pop off plates till we found it
I can not find a web site for Brooks. Can somebody tell me the torque for Brooks 65's and 88's with silver washers Both sets are new. and...
I am going to use a set of AJ TF style Billets that had a fuel rail at one time. Does anybody make a plug that I can bolt in or blue glue?...
I have 2 mags and a duel drive set up. Would there be any advantage to running 2? Let's say one at 32 and the other at 34 or 36? Just a thought
Mallory Tech Line I got thru to a couple of guys that were of real good help by the names of Terry and Marko. If anybody other than me runs old...
Does anybody know of a muffler that will work on Zoomies? We tried some for a boat and they looked like morters at half track. We have to have...
They said it was made before Mr Gasket days They acted like it had the plage?
Does anybody have or knows the wiring hook ups? I have figered out the mag to box, but need help to the coil and does it get a ground to kill it...