Separate names with a comma.
While I think that blower dynos are great as an in house tool for blower development. The large number of variables, that have to be addressed to...
Cotronics sells a lot of high temp epoxies, ceramics, etc. I would call them and see what they have to say but the durabond product shown...
I agree 100% with the ring in the aluminum and receiver in the cast iron not only will it round off often the "points" where the cylinders meet...
Damn that's an excellent camera, About 4 years ago I shopped around and the best thing available for under 3 grand was a Panasonic video ($639.00)...
Maybe when Randy gets that dash setup for the datalogger, you could rig up a WOT switch so that after the launch you would be able to monitor the...
I saw the Ohio crank that cracked after 10 passes. It cracked through the rod journal, the lightening hole through the rod journal was offset so...
Performance industry icon Crane Cams has reopened under the new ownership of S&S Cycle, and is actively engaged in manufacturing and sales...
I have not run one personally but know several people who have had them go south on 10.5 cars with both big nitrous motors, so I am sure with a D...
I used the T&D on my nitrous car years back and the problem was by the time you were on the 12th spring or so my arm would be so damn tired and...
Jody, I helped a friend wire his car to use an air throttle, his car had a delay box so it already had a separate button to back up the car and...
Outlaw 68, Did not mean to be disagreeing with you, since I do agree it sounds just like a slipping sprag on a stator even though the RPM...
This is just my 2 cents but here goes, If it was the converter it would either leave weak with a bad stator or if it was just blowing through...
I don't think you could go wrong with either a winberg or a bryant, both are top notch.
I would also be interested in the outcome of this issue, it does not concern me now but its always good to know all you can. Richard G
Have used one on a 14/71 hemi RED no crank trigger. Works great, I have used everthing from MSD the 8979 to the digital 7 so the 8973 was just...
Some say TriFlow, Some say WD, Some say ATF, me if its marvelous and mysterious its gotta be the best.
Luckily it was my van and I new Bigfoot at ATI so he told me what I hurt. I pulled the trans apart, filtered the fluid through cheesecloth, got...
Although the terms often overlap, An overunning clutch (as usually found on a starter) generally uses rollers that are captured between an...
Rollout, taken from NHRA's website Racing Technology Rollout and reaction time — more important than you might think by Wayne Scraba...
Its always a good idea to blow some marvel mystery oil through the pump, barrel valve, and injectors to protect against damage from moisture....
