Separate names with a comma.
I had fantastic results with Mobil 1® ATF in a nitrous doorcar. It is a fantastic lubricant and also has anti-varnish agents, however, its flash...
Pinned rings I had a bike engine (4 stroke) that had pins in the lands so that the rings would not rotate, I can't remember if it was a Japanese...
The major differences between non racing sythetic or regular ATF and hydraulic or compressor oil are two things. 1, the amount of temperature...
Neil Chance is now recommending amsoil synthetic compressor fluid, it has a super high flash point of 495° and a fire point of 522° and it also is...
Even though it's 11to1 if you are running alcohol and stay at 20% over with an 8/71 I doubt you will need reciever grooves to hold it. But that's...
Any chance of ever getting a website with pictures and prices on the lifters? I have made a simalar post on another site to a distributer of Morel...
This should be an interesting thread...I look forward to hearing how people feel on this also.
I just figure if you are using motor oil to lube with and its in a squirt bottle with a bendable spout and you already got the covers off how long...
I am new to this myself and I would say one place that the Hemi was different from most other motors I had worked on, was in the valve gear. If...
I think it would be important to add that when using the ER 80D-2 to weld normalized 4130 Chrome Moly one should preheat the weld area to 150°f...
I agree with this, if its all together and healthy right now its going to be easy to sell and then you can get yourself something with a small...
Racing motor oils are like a martini, As James Bond said, shaken not stirred please, Many oil additives like zinc phosphate are heavier...
On one of the other boards I frequent there was a post saying that the hellfire is hard on cylinder walls and when I asked what he meant he said...
Just like Johnny Cochran said, If the threads don't fit the rod will quit :cool:
On this subject, is pinning the caps effective at keeping them from dancing on the BBC, and if so where do you like to drill them and how large a...
Man is that a hard website to navigate to the price page,...
A lot of people also have good luck with the Torco ep lube http://www.torco-oil.com/torco_product/mpz_engine_hp.html [IMG]
Just my 2 cents but I think its a good idea to run as good an axle setup as possible on a blown car. The rules go strictly by et/speed but when...
While I am not saying that they are 'not' overpriced to some extent, if you look at the price of a 16v lithium power tool battery and the output...
I would look at a Coan XST or one of the other glides with the 1.25 input shaft. The Rossler turboglide is a neat deal with the 1.40-1.57...
