Separate names with a comma.
AA performance I have seen as much as 43lbs of boost @ 39% OD @8000 rpm on my 555 BBC with intake temps never over a 100 degrees it's an awesome...
I would definitely move the blower back at least far enough to get the retro opening in the manifold! The idea of the retro is since most if not...
For nitro it's typically.009" per inch of bore ! .03783" or round up to .038" when it comes to ring end gap I always error to the larger side! I...
I have a heavy door car that I'm putting on a diet and im running a blown alcohol BBC and have been running a Petersons remote oil filter with a...
I have a set of weld alumastar 16x16 double beadlocks with 5 on 5" bolt pattern with 6.5" BS for $1,500 and they are in great shape! You can call...
Even though it’s efficiency will be diminishing and making more heat at 30% than 20%OD I’m certain it will still make more power especially since...
I’ve been running the GRP 5550 rods with the L-19 1/2” hemi bolt ,rod bolts torqued to 100-115 ft lbs for 4 years and no retorque ever on a 555...
Thanks Andy for your help, if the blower shop doesn’t help me I’ll be calling you?
I run a 555 bbc with a 14/71 HH retro blower at 39%OD makes 43 lbs boost and run the power grid ignition 7720 box with the 7730 controller with no...
Also andy does anyone ever run a screen gasket on their race blowers and would it cause a restriction or any power loss??? A screen definitely...
REEHL Equipment do you make a gear drive that will fit the new century blocks?
Thank you very much andy actually I just shipped it back to the blower shop today since it was their blower and I will see what they say and if I...
Yeah andy the rotors probably have 4 or 5 gouges on the lobes can they be repaired good as new and considerably cheaper than replacing the rotors?
I’ve been running the Callie’s cranks but eventually bent one and took out number 2 main, tried a Crower and my bearings never looked better but...
