Separate names with a comma.
I don't know any law firms out there but I can feel for you. You didn't mention what the problem is but we have been burned before. I think...
Not sure too much is a issue. Not enough would be a worry. We run around 125 with no problems. We may even up that some. Just be sure you don't...
That you must check yourself. No set up will stack up the same as a rule. If you need to know for belt length you just need to be close but not...
We had real BAD main bearing problems last year. One lap and done. Went to a differant bearing and Brad Pen Nitro 70 and ran 10 or so laps and...
Clean, Clean, Clean. Check all threads very close. Make sure all your surfaces are flat no burs or high spots. Check all oil passages. Be sure no...
Nostalgia stuff is all we run and yes the crowd loves dry hops. We have run at several tracks that will ask you to do dry hops to shake the rocks...
With that combo I would question the 30 OD at the strip. You have a good chance of a large pile of parts on the ground. The first to go would be...
AJ is right your pump will pull from whatever line has the least resistance and that would be the uncovered one sucking air. Not good. Would work...
We saw a guy doing the same as this. I assume you needed a seal because your shaft is exposed. The guy we saw was running REAL close to the pump...
I agree with the throw the electronics in the trash. We run a nostalgia car and plan on staying that way. I can see the need for the electrics in...
I agree with Mike. The anti-sieze also will dry up with the heat compounding the problem. There is high temp anti-seize I beleive it has copper in...
The only time we ever got checked we had to start the motor and the tech guy killed it with the switch. We run a mag kill one the same Bat kill....
Be very carefull with the heating trick. We pull all kinds of things in our line of work. Including useing several 100 tons of pulling power. The...
I didn't think that sentence was in the english language I must be reading it wrong. I know it has never been used around here. Time will tell...
Simple math. More power=more maintenance
