Separate names with a comma.
Yes th ey go bad all the time. Can either show a straight line at the bottom, random nose all over the screen or some low temp. Never seen one go...
If you got the money the carbon fiber is the best. If not then read this and see if it answers your questions
Yes, if it is tied tight to the mag then it issubject to high frequency vibrations. Zip tie it to theblower bag straps in the front of the blower
I can back up what promodracer said. I called the refinery and talked to their expert and he stated the only change was in the name. Other than...
You most likey are suffering from detonation.
I believe there is a standard position for placement of the EGT sensors and that is 2.5” from the head flange area and the tips in the middle of...
Will, I agree with you. A turbo PM does not launch like a blown PM and is going to hit the bar very differently
Right now Alky Pro works with Altalab, PerformAire and Computech RaceAir. I have only used it with AltaLab. If you buy AltaLab you don’t need the...
1050 is considered the max but have seen 1100 if running1/8 mile but that is risky
Average of 450 but you will always have a couple that are hotter.
So you have the cranktrigger plugged into the gray cable going to the Grid and you the white wire from the Grid going to the upper plug on the mag?
I think that is a good as you are going to get. The Automan Y fitting is very smooth inside.. i doubt that there is any turbelance created in that...
Strange carbon brakes have stopped several pm’s i know that chutes did not open with no problems. You will not have a problem with Strange.
A lot of blown promods use Strange carbon brakes with no problems. Same on Strange Ultra case with big bearings and 9 1/2” gears.
If you don’t file them flat and smooth then the air in the liner may leak into the tire.