Separate names with a comma.
There was no oil in the filter on start up, my filter does not have any bypasses in it. Have ran this filter for years so element is fine, not...
Hi Guys, Yes only on start up, I will have to check data for the cold pressure, hot is around 70-80 psi. BAE 6 heads, 24 deg timing at idle. I...
BAE Hemi with PSI mag drive, P&P dual stage oil pump, oil is 50 weight and warmed before starting, no oil in pan. I have been having trouble...
Dr Bill Dr Bill was so giving and helpful every time I called. Helped immensely with my car. RIP Bill. Joe Schembri Joe Blo Racing
The wire are old and I will change them. We also had an oil leak at the quick release breather tube which did fill the # 3 plug tube with some...
We have both heads and block earthed to the chassis and back to the coil. I will try .015 gap next time. thanks
Ok thanks John
Hi Guys, I have an MSD 44 amp mag with points box in my doorslammer, its a billet BAE, using a six shooter and NGK 6061-10 plugs. Problem I have...
