Separate names with a comma.
Jay is that after every race? I'm new to a lot of this blower stuff including aluminum rods. Trying to figure out maintenance levels, which parts...
Instructions that come with the rods states to not leave them torqued up. I don't know why aluminum rods would be different outside of the...
I have pics but dont have anyway to post pictures that I'm aware of.
I bought a set of MGP aluminum rods from a mail order source and had the bolts pull out of the rod on the 3rd run. Made quite a mess of brand new...
Another noob question. Can you successfully run a 14MM belt on 13.9 MM pulleys? I bought a batch of pulleys and a belt that was advertised as 14mm...
A follow up on the above. I ended up buying a new idle check valve and set it at 17 PSI. Finally got back out to the track. I reset BV leak down...
Jeff. I have tried lapping this idle check valve as it does weep. I have not been successful in getting it to not weep. The seat appears to be...
Reviving an old thread. I have no idea hy two of these K style broke. I have changed to a cube and it is holding up so far. Thanks for all of the...
Mike and Jeff. Just checked idle return poppet. It opens at 3PSI. This is with the poppet hooked directly to my CO2 bottle with a 0-15 psi gauge...
OK Jeff and Mr. Kosky. You want me to check fuel pressure before the BV is this correct? Yes this is a PG with TB brake. Chevy 540 CI. 11:1 CR...
I just pulled up my data recorder file and at idle the pressure is only 1 PSI and steady. What PSI should I have the idle check set at? I am...
Jeff an Mr. Kosky, thank you for your reply. I have had th BV any way from 60% to 100% I should have stated that I can get a smooth idle untl i...
Having the blower surge curse. At idle with surge I can see butterflys mving in and out as the idle goes up and down. I can put my finger up...