BROWELL TRICK TITANIUM AND BOHR BELLHOUSINGS

Browell #7148 7 3/8 deep chrysler /chevrolet pattern made for bruno and a lock up 6.3 certified . Browell #7402 6 1/4 deep but comes with a extra 1 inch spacer to use lock up . chevrolet olds pontiac pattern made for bruno and a lock up with spacer and is 6.3 certified . Browell #8632 7 1/4 deep with chevrolet pattern made for bruno with a lock up .Browell #8695 7 1/2 deep chrysler pattern made for a quick drive without a lockup and is certified 6.3 Trick titanium # 3815 8 5/8 deep chrysler pattern and made to fit a lenco . this is out of a tim mcamis promod car and has 6.3 cert ified . it comes with a b&j billet aluminum candlestick and bearing assembly with cross shaft and the omron two step switch . Bohr Racing #0935 8 1/2 deep titanium bellhousing with chevrolet pattern made to fit quick drive with a lockup .. its 6.3 cerified ..all cans have starter pockets and have never been damaged or abused . for any questions or if you need a pic let me know text me at 817 233-5448 . aluminum cans are 1600.00 and titanium cans are 2600.00

 

would you give me the details on the 8695 bellhousing.
Mahalo Doug

 

this can looks new as we didnt run it much at all before going to a lock up . its 7 1/2 deep chrysler bolt pattern and made to fit a quicker drive setup and has starter pocket and a inspection cover in it . if youd give me a phone number id send you pictures of it .or you can text me at 817 233-5448

 

Would you take a titanium clutch can with cross shaft in trade for a bruno non lock up starter pocket can?