Torque Questions

Discussion in 'PSI Superchargers Tech Questions' started by Flyboy68, Jul 9, 2009.

  1. Flyboy68

    Flyboy68 Member

    Joined:
    Mar 26, 2006
    Messages:
    566
    Likes Received:
    0
    526 hemi. We torqued our L-19 rod bolts w/ the ARP moly lube to 90lbs. Then we were told not to do that and to use straight oil. So we disassemble the motor to clean all the rods, caps, bolts, etc. Reassemble and re-torqued to 90lbs w/ oil. Is that okay? Or did we maybe weaken the bolts/rods by torqueing w/ moly lube?

    Josh
     
    #1
    Flyboy68, Jul 9, 2009
  2. GregM784

    GregM784 Member

    Joined:
    Aug 24, 2008
    Messages:
    915
    Likes Received:
    14
    Mine go to 78 with reg oil. I do not believe you hurt the bolt.
     
    #2
    GregM784, Jul 9, 2009
  3. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    my brooks rods are at 90 thats with the black washers... no I don't think you hurt anything..but call ARP and ask them..Dave
     
    #3
    secondwindracing, Jul 9, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM