Steering Damper on A funny Car

Discussion in 'PSI Superchargers Tech Questions' started by willy200, May 9, 2009.

  1. willy200

    willy200 Member

    Joined:
    May 26, 2008
    Messages:
    318
    Likes Received:
    0
    How do most of you guys fit a steering Damper on to the front steering on a Funny car
     
    #1
    willy200, May 9, 2009
  2. jim phillips

    jim phillips ta/fc

    Joined:
    Apr 29, 2007
    Messages:
    1,242
    Likes Received:
    0
    i have seen them with tabs welded on the tubes but i like a tube clamp thats bolts around the tube easier to adjust
     
    #2
    jim phillips, May 9, 2009
  3. rattler

    rattler AA/Fuel Altered

    Joined:
    Feb 22, 2008
    Messages:
    260
    Likes Received:
    0
    I use a 60's Volkeswagon bus steering dampner shock with a stud welded to the frame . I have a 2" piece of tubing that slips over the tie rod with two tabs welded on or a u-strap wrapped around the slip-joint and welded on.
    Remember, if you use the VW shock, it uses metrik bolts.
    Ricky
     
    #3
    rattler, May 9, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM