PSI Set up ISSUES

I Am Running A 206d On A Bbc,44 Amp Mag, 8 Nozzle System. I Am Putting Out #2 At A Idle, And At The Hit there Is A Hesitation sometimes, it seems to be flooding out the motor at a idle, I Have Leaned Out The Barrle Valve As Far As I Can ,to The Point That The Rear Of The Blower Is Getting Warm. after it clears out it runs great. If There Is Anyone Out There That Can Help I Would Really Appreciate It. Please Call 707 974 3185, Butch
Thanks Again For All Of The Great Help And Info !!!

 

When you say an 8 nozzel system do you meen 8 in the hat only , or 8 in the hat and 8 in the ports? P/S nobodys going to call you long distance to give you free info.

 

psi set up

Sorry About That, If You Can Pm Me Your # I Will Call You Back, The Set Up Is 2 .060's In The BACK OF THE Hat, 2 .080 In The Front SiDE Of The Blower 1 Left Side And One Right Side And 1 Port Nozzle Per Cylinder.
Thanks Again BUTCH

 

What size nozzels in the ports? ( all of them) do you have a low speed lean out valve ( N/O valve?) a pump loop? you might want to send the whole system to Randy Anderson and have him flow it.

 

Psi Help

Butch Call Lonnie Hoode Very Helpful And Has Had A Conventional Head Bbc In The 6.20's Converter Door Car With A Psi And N0 Hurt Parts 508-776-4898

 

Lonnie is a great guy to talk with and was very helpful...Psi BBC SETUP..
Also Cantrell Racing was a great help . Will have Cantell tune up the old Psi.
Thanks Guys..