Pitted Brad Intake

Discussion in 'PSI Superchargers Tech Questions' started by Cdn526, Nov 16, 2007.

  1. Cdn526

    Cdn526 Member

    Joined:
    Dec 12, 2006
    Messages:
    535
    Likes Received:
    5
    Due to human error, alcohol drips from the injectors have pitted (or more like made miniature craters) my Brad mag intake.
    Can one get this repaired??
    Thanks!
    Clif
     
    #1
    Cdn526, Nov 16, 2007
  2. secondwindracing

    secondwindracing top alcohol

    Joined:
    Feb 10, 2004
    Messages:
    2,894
    Likes Received:
    7
    I've fix one that was pitted very bad...jb weld or a very hi grade epoxy
     
    #2
    secondwindracing, Nov 16, 2007
  3. Nathan Sitko - 625 TAD/TAFC

    Nathan Sitko - 625 TAD/TAFC TAD / TAFC

    Joined:
    Jun 24, 2003
    Messages:
    725
    Likes Received:
    1
    Is there any reason it couldn't be welded and then re finished?
     
    #3
    Nathan Sitko - 625 TAD/TAFC, Nov 16, 2007

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM