pistons for older veney heads

hi wanted to know if you need special pistons for these heads, veney older serial 535s. block is std deck kb stge 4. needing to get around 10 to1 comp for blown deal to run 7.50s in a altered. also might any body have a good used set kicking around. have bore size right now 4.187 but willing to bore it out if need be. forgot have a 4.5 stroke crankshaft. thx guys

 

i have a set of used 4.375 pistons, but you would have to buy new rods. we used a .100 tall block with a 4.5 stroke.....had 12 to 1 compression. would make you a great deal on them if interested.
Darren Russell
fast378@woh.rr.com

 

The earlier Veney's are 170cc's like most of the other makes of fuel billets, although if your looking to get 10-1 comp with a 4.5" crank, you'll either need less dome or a shorter rod. Arias makes somewhat of a shelf piston for blown alky, certain popular ring stacks and compression heights, if you can figure the right rod length to work with your combo, you can order replacements in pairs instead of 4, kind of nice if your a low-buck (like most of us) racer. I'm now running #623-624 Veney's and was running Stage V water heads before with the same pistons.