Mike Canter -2 step jet

Discussion in 'PSI Superchargers Tech Questions' started by Don Onimus, Aug 14, 2009.

  1. Don Onimus

    Don Onimus New Member

    Joined:
    Feb 28, 2009
    Messages:
    1,337
    Likes Received:
    0
    Mike, Going to use a 2 step on the blower motor. Without getting into all the numbers, What do you think is a good jet number to start. I will figure out what it wants from the flow meter and other numbers, But do you think I should put a 50 or 60 to start don't want to be to lean. Going to try around 3500 RPM's or so. Will see what it likes that day. Thank-you Don
     
    #1
    Don Onimus, Aug 14, 2009
  2. Mike Canter

    Mike Canter Top Dragster
    Staff Member

    Joined:
    Mar 10, 2004
    Messages:
    4,630
    Likes Received:
    189
    What solenoid are you using for the Two Step Leanout and what is the size of the orifice in the solenoid if you know it? What RPM are you going to leave at on the Two Step? 5000?
     
    #2
    Mike Canter, Aug 14, 2009

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM