Mag/Fuel Pump Support

For you guys running a front mounted mag and fuel pump combo,(or dual fuel pumps) would you mind sending me some pics of your set up so I can see how everyone supports this kind of setup.
Don't care if its F/C, fueler or doorslammer, just need an idea of what you did, and materials that worked, or didn't. I was simply going to engineer a piece of 3/8 moly tubing with heim joints on the ends and figure out a way to connect it all together, but....after assembling everything, it weighs alot more than I thought.
As always help is greatly appreciated...Keith

 

support

HI KEITH WE SELL THE MAGNETO HANDCUFFS AND USE THE SMALL 5/16 HEX BAR AND 10/24 HEIMS YOU CAN SEE THE CLAMP AT WWW.RBSSUPERCHARGERS.COM UNDER THE MAGNETO SECTION AS FAR AS A FUEL PUMP SUPPORT WE OFFER BILLET FUEL PUMP CLAMPS AND WE COULD USE A SHUT OFF BRACKET TO MAKE ONE OF THE UP ALL THIS WOULD WEIGHT IN LESS THAN A COUPLE POUNDS. GOOD LUCK 530-292-3368