hemi,blower rest.,pistons,wheels,cs2,belhousing,crower 10.7,fuel mng,floater

Discussion in 'Noonan Classifieds' started by brandon mckinney, Oct 13, 2016.

  1. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
    528 NRE Blackhawk (roots blower combo)
    .100 tall 4.500 cn billet hemi (wide pan option)
    Bryant 4.150 crank / magged no cracks
    diamond coated pistons
    morel lifters
    grp pro rods
    60mm roller bearing cam
    rcd bearing support drive / pump ext.
    moroso valve covers
    12 runs on rods
    long block minus intake
    available after 11/4/17
    28k

    521 NRE Blackhawk (roots blower combo)
    used .100 tall bae billet block 4.467 (fresh from bae )
    rcd geardrive / pump ext
    new J&E pistons
    new grp pro rods
    new 60mm cam
    new 4.150 stroke Bryant key way crank
    moroso valve covers
    new morel lifters
    longblock minus intake
    0 runs
    32k

    Mcamis used 24 qt drysump tank made fit beside plastic 10 gallon fuel tank 750.00
    used cs2 taylor Kevlar 2 speed blanket 300.00
    NEW Diest 14.2 Roots blower bag never used 750.00 (retail 989.00)
    used DMPE 3 stage fuel management with EM timer 600.00
    used DMPE 5 stage fuel management with EM timer 750.00
    used Strange Ultra Case 3.812 4.29 9.5 pro gear 40 spline 1350 series yoke 25 runs 1500.00
    used Strange Ultra Case 3.812 9 inch 4.71 pro gear 40 spline 1350 series yoke 5 runs 1500.00
    (NEW) CP screw blower pistons 4.500 bore 1.094 pin gas ported coated skirts qty 11 1200.00 (new in box)
    used rcd screw blower belt guard with starter bracket 125.00
    crower 10.7 hemi aluminum clutch scalloped flywheel no ring gear 3 disk with titanium donut 1000.00
    meyers clutch disk floater flatness checker 100.00
    used Cs2 lenco 2 speed with reverser and air pod 2800.00 (1.41 or 1.44 ratio) other ratios available
    used stroud 430 pro mod chutes 500.00
    used strange steel floater brake kit rotors,caliper bracket,calipers 2012 earlier models 450.00
    used strange ultra strut steel front brakes rotors with calipers, 350.00
    used set stealth titanium valves for fathead 2.400 int 1.900 exh square groove locks with tit. retainers margins good 600.00
    used set victory lash locks radial groove with retainers 300.00
    used RCD 8MM Screw blower top pulley 33 tooth 150.00
    RCD 8mm Screw blower top pulley 36 tooth 175.00 (NEW)
    RCD 8mm gt center flange 72 tooth aluminum 150.00 barely used
    used RCD 8mm gt center flange 73 tooth aluminum 125.00
    used RCD 8mm gt center flange 80 tooth magnesium 125.00
    used RCD 8MM gt flat back 62 tooth aluminum 100.00
    used RCD 8mm gt flat back 80 tooth aluminum 100.00
    used RCD 14 mm gt 30 tooth flat back top pulley roots blower 100.00
    2 RCD 8mm -1600 PS blower belts 250.00 each (NEW)
    Used Oberg oil filter 75.00 pending sale
    New Oberg oil filter 125.00 pending sale
    P&P wet sump pump 750.00
    1.31 CS2 Largeshaft gearset 1000.00
    1.35 CS2 Largeshaft gearset 1000.00
    1.38 CS2 Largeshaft gearset 1000.00
    1.44 CS2 Largeshaft gearset 1000.00
    Lenco CS2 Front case like new cond. 500.00

    Bullet 60mm screw blower 450.00
    Bullet 49mm stock journal alcohol cam 250.00

    new in box GRP aluminum rods L19 bolts 7.200 long 1000.00
    new in box GRP aluminum rods L19 bolts 7.086 long 1000.00


    Used 19 inch santuff pro mod shocks 750.00 (steel bodies)

    Like new santuff 21 inch drag radial shocks aluminum 1200.00

    used koni double adjustable aluminum 19 inch pro mod shocks 450.00

    all parts sold plus shipping

    Contact Brandon McKinney 254-592-1302 mckinneyrace@embarqmail.com
     
    #1
    Last edited: Nov 22, 2017 at 1:42 PM
    Problem Child likes this.
  2. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  3. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  4. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  5. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  6. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  7. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
    B
    Bump
     
    #7
  8. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  9. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  10. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  11. willy200

    willy200 Member

    Joined:
    May 26, 2008
    Messages:
    318
    Likes Received:
    0
    crower 10.7 hemi aluminum clutch scalloped flywheel no ring gear 3 disk with titanium donut 1000.00
    meyers clutch disk floater flatness checker 100.00
    Contact Brandon McKinney 254-592-1302 mckinneyrace@embarqmail.com[/QUOTE]

    Hi Brandon, are these items still for sale and what condition are they in and is the clutch complete.
     
    #11
  12. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
    Yes I still have these items available clutch is in great condition only has about 15 runs from new.
     
    #12
  13. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
    Clutch is complete.
     
    #13
  14. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  15. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  16. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  17. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
  18. GottaGoFaster

    GottaGoFaster New Member

    Joined:
    Nov 17, 2016
    Messages:
    18
    Likes Received:
    0
    Interested in the cs2 3spd blanket--is it nylon or kevlar? When was it new and when last certified?
     
    #18
  19. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1
    it is nylon perfect condition only used a few times needs recert would guess it was around 2010 last cert.?
     
    #19
  20. brandon mckinney

    Joined:
    Jan 2, 2008
    Messages:
    240
    Likes Received:
    1

Share This Page