Hays Clutch

I Have A Hays Clutch With A Steel Hat I Want To Have It Checked Out Springs Etc Does Anyone Know Who Can Service These Hats Thanks

 

Just give Roy Story a call @ Hays, (Mr. Gasket Performance Group). The number is listed in the back of National Dragster, I can't recall his extension off the top of my head but if you go to the operator & ask for him that will work too. If you have any trouble P.M. me & I'll dig up all the #'s & info.
Thanks & good luck,
Bill

 

didn't i tell you i would jamie?......

 

Bruce I Didnt Know If You Could Check Springs I WAS THINKING THAT YOU COULD GIVE ME THE WEIGHTS FOR THE FINGERS AND SUCH WHEN WOULD BE A GOOD TIME FOR YOU AS YOU Thanks Jamie

 

i can show you how to check the spring and even cut the plate. there isn't anything about that clutch i can't do or can't show you how to do. when do you want to go through it? or when are you going to put it in. does the flywheel and plate have any rund on it , how about the disks? you need to bring EVERYTHING you have for the clutch and i can show you how to completely set it up.

 

You Let Me Know When Is Good For You I Know Your Getting Ready For E Town I Will Bring Everthing We Have And Let You Take A Look At It And Tell Me What We Need Or Should Have And Well Go From There Thanks Bruce-----jamie