E M BATTERY wireing question

Discussion in 'PSI Superchargers Tech Questions' started by blown1969camaro, Mar 11, 2012.

  1. blown1969camaro

    Joined:
    Apr 18, 2010
    Messages:
    455
    Likes Received:
    2
    please dont awnser unless u know first hand please or if u are not familar with this battery (dont need hear say)

    i bought e m battery 15v from dave
    i have the following in auto outlaw promod

    4 lean outs (not all on at once)

    trans brake lencodrive

    starter seloniod

    2 led tail lights

    racepak

    2 big air selonoids for lenco drive (only used for the pass ,i shift car in burnout with mcamis shifters)

    i dont think im forgetting andthing


    SO HERE IS QUESTION
    1 should i run a main fuse and how big
    2 what size wire to run everything (keep in mind little wire that comes with it)


    (chutes are cabels)
     
    #1
  2. underby6

    underby6 Active Member

    Joined:
    Sep 28, 2006
    Messages:
    1,189
    Likes Received:
    0
    I have nearly an identical setup and here's what I've found. First off have a second battery, eventually it'll go dead completely and not many teams will have that specific battery. We used the small wires to tie into a terminal with a 20A fuse, everything from there is 14g.

    Brandon Booher
    NHRA TAD #34
     
    #2

Share This Page