Dunn Offset Drive Question??

Discussion in 'PSI Superchargers Tech Questions' started by funnycarguy 230, Nov 10, 2005.

  1. funnycarguy 230

    funnycarguy 230 New

    Joined:
    Jul 6, 2004
    Messages:
    388
    Likes Received:
    0
    I Have A Dunn Front Mag Drive For A Bbc And I'm Running A Supermag 4 I Have The Dunn Cross For The Bottom Of The Mag And The Drive Is Set Up For The Quick Release My Question Is When I Put The Mag Onto The Drive The Cross Does Not Ingauge With The Drive Is It A Different Cross For The Quick Release It Looks Like It Needs To Be About Twice As Tall Also I'm Running A Waterman Red Pump And Need The Quick Release Plate That Bolts To The Pump Who Sells These Thanks For Any Ideas Jamie
     
    #1
    funnycarguy 230, Nov 10, 2005
  2. DQUES

    DQUES Member

    Joined:
    May 20, 2004
    Messages:
    650
    Likes Received:
    6
    My red pump has the quick release flange machined onto the pump housing and needs no adapters .
     
    #2
    DQUES, Nov 10, 2005
  3. RBS

    RBS Authorized Merchant

    Joined:
    May 6, 2004
    Messages:
    1,095
    Likes Received:
    0
    Dunn Drive

    Hi Jamie We Sell The Quick Adpt. Part For Your Pump For 27.50 You Can See Pics At Rbssuperchargers.com Under Fuel Pump Extension Section If You Like On Your Drive If You Have Any Pics Of What Your Two Parts Look Like Shoot Me An Email And We Might Be Able To Identify The Problem Thanks Jr
     
    #3
    RBS, Nov 10, 2005
  4. REEHL EQUIPMENT

    REEHL EQUIPMENT Authorized Merchant

    Joined:
    Mar 17, 2004
    Messages:
    1,009
    Likes Received:
    1
    Call Mike Dunn At 940 240-1603. He Will Help You With This.there Is At Least 4 Different Dunn Cross Drivers. I Always Call The Guy That Made The Product For Advise. Thanks, Robert.
     
    #4
    REEHL EQUIPMENT, Nov 11, 2005

Share This Page





XenPorta 2 PRO © Jason Axelrod from 8WAYRUN.COM